Environmental protection, energy conservation, and low-carbon living have become the main theme of global development. The pneumatic punching machine industry is developing a circular economy on the basis of efficient and environmentally friendly development, taking the path of sustainable development. The production and development of the feeder industry, as well as the automation equipment industry around the punching machine, must also follow this rule. While improving the quality of the feeder and improving production efficiency, attention should be paid to reducing energy consumption and environmental pollution, and efforts should be made to achieve green production to achieve sustainable development. In addition, with the strengthening of the development of the manufacturing industry in Southeast Asia, the export volume of domestic feeder machines has expanded significantly. Although the overall competitiveness cannot compete with developed countries, the development momentum is strong and the prospects are broad.
Rotate the flywheel of the pneumatic punch by hand, adjust the slider stroke to the lowest point, loosen the four fastening bolts on the back of the press, loosen the locking nut of the lifting screw, and rotate the handwheel by hand to adjust the body to the appropriate height. Install the mold between the slider and the workbench. Then, according to the reasonable spacing between the upper and lower molds, rotate the handwheel to adjust the accurate height of the machine body. If only minor adjustments are needed, the locking nut on the ball head screw can be loosened, and the ball head screw can be rotated to fully meet the working requirements for the sealing height.
After adjustment, all four fastening bolts, lifting screw, and ball head screw locking nuts must be tightened.
The characteristics of the dedicated frequency converter for pneumatic punching machines:
1. Has excellent resistance to current shocks, reducing the occurrence of overcurrent faults during equipment operation;
2. Has excellent overvoltage suppression ability, reducing overvoltage faults that occur during equipment operation;
3. The frequency converter does not require the use of external braking resistors and braking units, saving equipment costs;
4. The frequency converter is compatible with the motor at the same power, without the need to amplify the capacity of the frequency converter
Improve the efficiency of pneumatic punching machines, extend the service life of molds, and meet production needs. Main technical and economic indicators: 1. Installed on molds with a punching rate of 400-1200 per minute; 2. Has high wear resistance; 3. Can provide a complete set of drawings and material data.